Manual

2. Panel Instruction
Front view
SPEAKER: Stereo audio speaker, for SDI embedded audio, HDMI audio and analog audio monitoring
PHONE: 3.5mm earphone socket, for SDI embedded audio, HDMI audio and analog audio monitoring
POWER: Power on/off
Connect with power cable, press the “POWER” and the power indicator is turned on and the monitor will
be switched on and get into normal working status. Press the “POWER” again, the indicator is turned off
and monitor is switched off.
Disconnect with power cable if the monitor will not be used for a period of time.
F1: User definable function key 1
F2: User definable function key 2
RATIO: 16:9 and 4:3 switch
ZOOM: Picture Zoom-in
Press “ZOOM” to switch ZOOM1: Canon DSLR scale zoom-in, and ZOOM2: pixel to pixel zoom-in.
DISPLAY: Display current settings
Press “Display” to display safety mark, title and the current input signal information
OK: Select and Apply
Under menu system, revolve “OK” to adjust settings and press to apply; and out of menu system,
directly revolve “OK” to adjust volume.
CVBS: Press to switch the input signal to Composite video
HDMI: Press to switch the input signal to HDMI
SDI: Press to switch the input signal to SDI
SCAN: Overscan / Underscan switch
MENU: Press to enter MENU
TALLY Light: Red, Green and Yellow 3-color TALLY indicator