Model: M-1090H 9"×2 Rack Mount 3GSDI&HDMI LCD Monitor User Manual Please read this User Manual throughout before using.
Preface Congratulations on your purchase of this product. Please read this user manual carefully. 1 ． All internal technologies of this product are protected, including device, software and trademark. Reproduction in whole or in part without written permission is prohibited. 2 ． All brands and trademarks of SWIT Electronics Co., Ltd. are protected and other relative trademarks in this user manual are the property of their respective owners.
Maintenance The Monitor 1. Please keep the signal terminals and the cooling vent away from knife-edge, metal or liquid in order to avoid short-circuit and damage. 2. Please don't try to disassemble any parts of the monitor by yourself, which would probably damage the monitor and do harm to human body, and it will cause the invalidation of product warranty. 3. Please don't touch the screen with your fingers, which would probably deface the screen. 4.
1. Features ◆ High resolution LCD Panel Consists of two 9-inch, 16:9, 1280×800 LCD panels, 16.77 million colors, 19-inch 4U rack mount ◆ 3Gbps SDI support Accept 3G/HD/SD-SDI input ◆ SDI 1080psf supported Support SMPTE-RP211 format: 1080psf (30 / 29.97 / 25 / 24 / 23.98) ◆ Multi Input/Output Support SDI, HDMI, CVBS input and loop through output ◆ SDI embedded audio output Convert SDI embedded audio to analog and output via 3.5mm earphone jack.
2. Panel Instruction Front view ⑴ SPEAKER: Stereo audio speaker, for SDI embedded audio, HDMI audio and analog audio monitoring ⑵ PHONE: 3.5mm earphone socket, for SDI embedded audio, HDMI audio and analog audio monitoring ⑶ POWER: Power on/off Connect with power cable, press the “POWER” and the power indicator is turned on and the monitor will be switched on and get into normal working status. Press the “POWER” again, the indicator is turned off and monitor is switched off.
Rear view ⑴ CVBS-IN: Composite video input (BNC connector) ⑵ SDI-LOOP: 3G/HD/SD-SDI loop through output (BNC connector) ⑶ SDI-IN: 3G/HD/SD-SDI input (BNC connector) ⑷ HDMI-LOOP: HDMI loop through output ⑸ HDMI-IN: HDMI input ⑹ TALLY controlling port (DB-9) ⑺ AUDIO L: Stereo audio left channel input (RCA connector) ⑻ DC 12V IN: Connect with DC12V 4-pin XLR power adapter.
3. Menu Operation ⑴ Press “MENU” and it will display menu system ⑵ Revolve “OK” to select an item. The selected item will be highlighted display. ⑶ Press “OK” to enter the selected item. ⑷ Under menu system, press “MENU” to back to previous menu. *The menu will automatically save and quit if it remains idle. 3.
3.4 TITLE submenu Revolve "OK" button to select the letters, and press "OK" to input. Select SPACE to input space and DEL to delete the left letter. Max 10 letters are supported. After setting, press "MENU", the system will save data to current user and quit menu. The menu will automatically save and quit if it remains idle. 3.5 DISPLAY submenu The DISPLAY submenu is to select the items to be displayed on screen when ‘DISPLAY” button is pressed.
4. TALLY Light Operation There are front TALLY lights on each of the display units, which can display RED, GREEN and YELLOW signals. The TALLY light controlling port is the DB-9 socket at the rear panel, and terminal description is as follows: Terminal Description 1 2 Y 3 G 4 R 5 6 7 GND 8 GND 9 GND The RED light is on when connecting the terminal “R” with “GND”, and goes out when disconnecting. The GREEN light is on when connecting the terminal “G” with “GND”, and goes out when disconnecting.
5. Specifications LCD Performance Size Display area Resolution Aspect ratio Brightness Contrast Color Viewing angle Video Format CVBS SMPTE-425M SMPTE-274M SDI SMPTE-RP211 SMPTE-296M SMPTE-125M ITU-R BT.656 HDMI General Working voltage Power consumption Working temperature Working humidity Storage temperature Storage humidity Dimensions Net weight (main body) 9 inches ×2 194×121mm × 1280×RGB×800 16:9 (4:3 adjustable) 250cd m2 700:1 16.
