Model: M-1071F 7"×2 Rack Mount HDSDI&HDMI LCD Monitor User Manual Please read this User Manual throughout before using.
Preface Congratulations on your purchase of this product. Please read this user manual carefully. 1 ． All internal technologies of this product are protected, including device, software and trademark. Reproduction in whole or in part without written permission is prohibited. 2 ． All brands and trademarks of SWIT Electronics Co., Ltd. are protected and other relative trademarks in this user manual are the property of their respective owners.
Maintenance The Monitor 1. Please keep the signal terminals and the cooling vent away from knife-edge, metal or liquid in order to avoid short-circuit and damage. 2. Please don't try to disassemble any parts of the monitor by yourself, which would probably damage the monitor and do harm to human body, and it will cause the invalidation of product warranty. 3. Please don't touch the screen with your fingers, which would probably deface the screen. 4.
1. Features ◆ New high resolution 7” LCD Panel Consists of two 7-inch, 16:9, 1024×600 LCD panels, with 900:1 contrast, H/V 160° wide viewing angle, and 19-inch 3U rack mount, ◆ Multiple inputs HD/SD-SDI, HDMI and Composite input ◆ Loop through outputs synchronization, and for logging and identifying material in recorded media.
2. Panel Instruction Front view ⑴ POWER: Power on/off Connect with power cable, press the “POWER” and the power indicator is turned on and the monitor will be switched on and get into normal working status. Press the “POWER” again, the indicator is turned off and monitor is switched off. Disconnect with power cable if the monitor will not be used for a period of time. ⑵ PHONE: 3.
Rear view ⑴ SDI-OUT: HDMI converted to SDI output (BNC connector) ⑵ SDI-LOOP1: HD/SD-SDI loop through output from SDI-IN1 (BNC connector) ⑶ SDI-LOOP2: HD/SD-SDI loop through output from SDI-IN2 (BNC connector) ⑷ HDMI-IN: HDMI input ⑸ TALLY controlling port (RS-232) ⑹ HDMI-LOOP: HDMI loop through output ⑺ DC 12V IN: Connect with DC12V 4-pin XLR power adapter.
3. Menu Operation ⑴ Press “MENU” and it will display menu system ⑵ Revolve “OK” to select an item. The selected item will be highlighted display. ⑶ Press “OK” to enter the selected item. ⑷ Under menu system, press “MENU” to back to previous menu. *The menu will automatically save and quit if it remains idle. 3.
3.4 TITLE submenu Revolve "OK" button to select the letters, and press "OK" to input. Select SPACE to input space and DEL to delete the left letter. Max 10 letters are supported. After setting, press "MENU", the system will save data to current user and quit menu. The menu will automatically save and quit if it remains idle. 3.5 DISPLAY submenu The DISPLAY submenu is to select the items to be displayed on screen when ‘DISPLAY” button is pressed.
4. TALLY Light Operation There are front TALLY lights on each of the display units, which can display RED, GREEN and YELLOW signals. The TALLY light controlling port is the RS232 socket at the rear panel, and terminal description is as follows: Terminal Description 1 2 Y 3 G 4 R 5 6 7 GND 8 GND 9 GND The RED light is on when connecting the terminal “R” with “GND”, and goes out when disconnecting. The GREEN light is on when connecting the terminal “G” with “GND”, and goes out when disconnecting.
5. Specifications LCD Performance Size 7.0 inches ×2 Display area 153.6×90mm Resolution 1024×RGB×600 Aspect ratio 16:9/4:3 Brightness 400cd m2 Contrast 900:1 Color 16.77 million colors Viewing angle Horizontal: 160 Vertical: 160 / ° Video Format CVBS NTSC SMPTE-274M SDI ° ∕PAL 1080i (60 / 59.94 / 50) 1080p (30 / 29.97 / 25 / 24 / 23.98) SMPTE-296M 720p (60 / 59.94 / 50) SMPTE-125M 480i (59.94) ITU-R BT.656 576i (50) 480I / 576I / 480P / 576P HDMI 1080i (60 / 59.
