Model: M-1071A 7" Rack Mount HDSDI&HDMI Audio/Video LCD Monitor User Manual Please read this User Manual throughout before using.
Preface Congratulations on your purchase of this product. Please read this user manual carefully. 1 ． All internal technologies of this product are protected, including device, software and trademark. Reproduction in whole or in part without written permission is prohibited. 2 ． All brands and trademarks of SWIT Electronics Co., Ltd. are protected and other relative trademarks in this user manual are the property of their respective owners.
Maintenance The Monitor 1. Please keep the signal terminals and the cooling vent away from knife-edge, metal or liquid in order to avoid short-circuit and damage. 2. Please don't try to disassemble any parts of the monitor by yourself, which would probably damage the monitor and do harm to human body, and it will cause the invalidation of product warranty. 3. Please don't touch the screen with your fingers, which would probably deface the screen. 4.
1. Features ◆ High resolution 7” LCD Panel 16:9, 1024×600 LCD panels, with 900:1 contrast, H/V 160° wide viewing angle, and 19-inch 3U rack mount ◆ High performance speaker Equipped with high performance 3.0-inch antimagnetic coaxial speaker, and the frequency response range is 130Hz(±5Hz)～22KHz. ◆ Multiple inputs HD/SD-SDI, HDMI and Composite input ◆ Loop through outputs Each of the 2 input HD/SD-SDI and HDMI has loop through output.
2. Panel Instruction Front view ⑴ TALLY Light: Red, Green and Yellow 3-color TALLY indicator ⑵ ENTER: Select and Apply Under menu system, revolve “ENTER” knob to adjust settings and press to apply; and out of menu system, directly revolve “ENTER” to adjust volume. ⑶ SOURCE: Input signal selection Press “SOURCE” and revolve the “ENTER” to select the input video signal. ⑷ F1: User definable function key 1 ⑸ F2: User definable function key 2 ⑹ A-WFM: Press to switch on the audio peak waveform display.
Rear view ⑴ DC 12V IN: Connect with DC12V 4-pin XLR power adapter.
3. Menu Operation ⑴ Press “MENU” and it will display menu system ⑵ Revolve “ENTER” to select an item. The selected item will be highlighted display. ⑶ Press “ENTER” to enter the selected item. ⑷ Under menu system, press “MENU” to back to previous menu. *The menu will automatically save and quit if it remains idle. 3.
3.4 TITLE submenu Revolve "ENTER" button to select the letters, and press "ENTER" to input. Select SPACE to input space and DEL to delete the left letter. Max 10 letters are supported. After setting, press "MENU", the system will save data to current user and quit menu. The menu will automatically save and quit if it remains idle. 3.5 DISPLAY submenu The DISPLAY submenu is to select the items to be displayed on screen when ‘DISPLAY” button is pressed.
4. TALLY Light Operation There are front TALLY lights on each of the display units, which can display RED, GREEN and YELLOW signals. The TALLY light controlling port is the DB-9 socket at the rear panel, and terminal description is as follows: Terminal Description 1 2 Y 3 G 4 R 5 6 7 GND 8 GND 9 GND The RED light is on when connecting the terminal “R” with “GND”, and goes out when disconnecting. The GREEN light is on when connecting the terminal “G” with “GND”, and goes out when disconnecting.
5. Specifications LCD Performance Size 7.0 inches Display area 153.6×90mm Resolution 1024×RGB×600 Aspect ratio 16:9/4:3 Brightness 400cd m2 Contrast 900:1 Color 16.77 million colors Viewing angle Horizontal: 160 Vertical: 160 / ° Video Format CVBS NTSC SMPTE-274M SDI ° ∕PAL 1080i (60 / 59.94 / 50) 1080p (30 / 29.97 / 25 / 24 / 23.98) SMPTE-RP211 1080psf (30 / 29.97 / 25 / 24 / 23.98) SMPTE-296M 720p (60 / 59.94 / 50) SMPTE-125M 480i (59.94) ITU-R BT.
