User Manual

35
7. SETUP
Move the cursor to the Setup item in the main
menu and press [HOME] button, SETUP menu
appears, as shown in the following figure.
Language: menu language, Optional items: EN,
Chinese
ColorSys: Set the DVI system, color in the analog
signal, Optional items: YPbPr, RGB（Only effective
under 720 P60/1080P60）
HDMIMode: Set the HDMI output signal mode,
Optional items: On, Off
Protocol: Control protocol type. Optional items:
VISCA,P-D,P-P
Address: protocol address, To be decided according
to the agreement, can be set up under the VISCA
items:1 ~ 7,P - P and P- D can be set up:0 ~ 254
AddrFix: If I can change through the serial port of
infrared switch, Optional items: On, Off(When set to
On, cannot address via a serial port to modify the
camera)
Net Mode: The net mode of camera, Optional items:
Serial, Paral
Baudrate: Serial port baud rate. Optional items: 2400,
4800, 9600
SETUP
Language EN
ColorSys YPbPr
HDMIMode Off
Protocol VISCA
Address 1
AddrFix Off
Net Mode Serial
Baudrate 9600
Select Item
Change Value
[Menu] Back