Datasheet

Swisstac
Switch interlock system
80
02.2009
All dimensions in mm
0
0
>
For dimensions, see Standard switch interlock system.
All dimensions in mm
0
Including keylock switches in a switch interlock system with mechanical blocking and release functions allows close supervision of the switches
status, and restricts operation to authorized personal.
There is a choice of three types of switch interlock systems with keylock switch. They differ according to their function:
0
Switch interlock system with pushbutton
Centre line (CL) spacing
1)
for variants 1, 3 - 7 14.5 mm
2)
for variants 1, 3 - 7 reduction to 9.0 mm at extra cost
3)
for variant 2 at least 20.5 mm
Standard switch interlock system with keylock switch
Function 1 Controls switching "On"
Possible with variants 3, 4, 6
Zero position: Unrestricted operation.
Maintained action position: Resets actuated switches to zero position and the same time
blocks all switches.
Function 2 Controls switching "Off"
Possible for variants 6, 7
Zero position: Switching "On" is possible.
Momentary action position: Turning the keylock switch to the momentary action position
resets the actuated switches to the zero position (keylock switch with momentary action mode
replaces release button).
Funktion 3 Controlls switching "On"
and "Off"
Possible for variants 1 - 7
Zero position: Unrestricted operation.
Maintained action position: Locks all switches at their present setting.
9
2)
9
2)
14.5 24 18
Separation any
in 6 mm steps
1)
14.5
1)
20.5
3)
20.5
3)