Datasheet

73
02.2009
Swisstac
Accessories
>
Continuation see next page
Continuation see next page
All devices without Emergency-stop pushbutton foolproof
Continuation see next page
Continuation see next page
Continuation see next page
CAUTION
A switching process might be released when replacing the lamp/LED !
Continuation see next page
Assembling
Fixing nut, raised mounting
Typ-Nr.
e
Fixing nut, raised mounting
Plastic black, panel thickness 1 ... 3 mm, for devices 35 mm
260-0003-00 0.001
Plastic grey, panel thickness 1 ... 3 mm, for devices 30 - 70 mm 260-0001-00 0.001
Plastic grey, panel thickness 3 ... 5 mm, for devices 30 - 70 mm 260-0002-00 0.001
Plastic grey, panel thickness 5 ... 7 mm, for devices 30 - 70 mm 260-0005-00 0.001
Fxing nut, flush mounting
Typ-Nr.
e
Fxing nut, flush mounting
Plastic black, panel thickness 1 ... 3 mm, for devices 35 mm
260-0003-00 0.001
Plastic grey, panel thickness 3 ... 5 mm, for devices 30 - 70 mm 260-0002-00 0.001
Location strip, raised mounting
Typ-Nr.
e
Location strip, raised mounting
Anti-twist device, in-line arrays or single switches, graduation 18 mm
260-0020-00 0.001
Anti-twist device, in-line arrays or single switches, graduation 24 mm 260-0021-00 0.001
Lens remover
Typ-Nr.
e
Lens remover 300-0001-00 0.012
Lamp remover
Typ-Nr.
e
Lamp remover 300-0002-00 0.003
Mounting tool
Typ-Nr.
e
Mounting tool
for tightening (or loosening) of the Fixing nut (at dismantled Element block)
300-0003-00 0.007