Datasheet

72
02.2009
Swisstac
Accessories
>
Continuation see next page
Other options on request
Continuation see next page
Switching system: SM = Slow-make switching element
Contacts: NC = Normally closed
Terminals: P = PCB terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm)
Technical drawing from page 88
Continuation see next page
Emergency-stop pushbutton
Label for Emergency-stop and Stop pushbutton
Front protection
Marking Typ-Nr.
e
Label for Emergency-stop and Stop pushbutton
43 mm dia., yellow
IP 40 ARRET D'URGENCE 200-1300-04 0.002
EMERGENCY STOP 200-1300-03 0.002
NOT HALT 200-1300-08 0.002
NOT-AUS 200-1300-02 0.002
without 200-1300-01 0.002
IP 65 ARRET D'URGENCE 200-1300-W4 0.002
EMERGENCY STOP 200-1300-W3 0.002
NOT HALT 200-1300-W8 0.002
NOT-AUS 200-1300-W2 0.002
without 200-1300-W1 0.002
Slow-make switching element for Stop pushbutton
Switching system Contacts Contact material Terminals
Typ-Nr.
Technical drawing
e
Slow-make switching element for Stop pushbutton
grey
SM 1 NC Gold P 231+0800-0P 10 0.003
S1 211+0800-00 10 0.003
Dismantling tool for Emergency-stop pusbutton, foolproof
Typ-Nr.
e
Dismantling tool for Emergency-stop pusbutton, foolproof 300-0017-00 0.004