Datasheet

62
02.2009
Swisstac
Accessories
Front bezel 18 x 24 mm usable for devices with front dimension: a 24 x 30 mm, flush mounting.
Continuation see next page
Continuation see next page
For use as IP 40: Cut off (with knife) the anti-twisting at the front bezel/actuator
Continuation see next page
For use as IP 40: Cut off (with knife) the anti-twisting at the front bezel/actuator
Continuation see next page
Technical drawing from page 88
Front bezel for Buzzer for 30- 55 mm
Front protection
Front bezel
b 24 x 24 mm
Typ-Nr.
a 18 x 24 mm
Typ-Nr.
e
Front bezel for Buzzer for 30- 55 mm IP 40 Plastic black 200-0000-00 200-6000-00 0.002
Plastic grey 200-9000-00 200-5000-00 0.002
Front bezel set, flush mounting
Front protection Front bezel
b 24 x 24 mm
Typ-Nr.
a 24 x 30 mm
Typ-Nr.
Ø 25 mm
Typ-Nr.
e
Front bezel set, flush
mounting
IP 65 Plastic black 200-4400-V0 0.007
200-6400-V0 0.008
200-8400-V0 0.006
Front bezel set Buzzer, flush mounting
Front protection Front bezel
a 24 x 30 mm
Typ-Nr.
e
Front bezel set Buzzer, flush mounting IP 65 Plastic black 200-6400-V0 0.008
Protective cover for buttons 35 mm
Front protection
b 18 x 18 mm
Typ-Nr.
a 18 x 24 mm
Typ-Nr.
Technical drawing
e
Protective cover for buttons 35 mm
hinged, transparent, with means for sealing
IP 40 200-4008-00 200-6008-00 62 0.002
IP 65 200-4008-W0 200-6008-W0 62 0.002