Datasheet

61
02.2009
Swisstac
Accessories
Continuation see next page
Front bezel 18 x 18 mm usable for devices with front dimension: b 24 x 24 mm, flush mounting.
Front bezel 18 x 24 mm usable for devices with front dimension:
a 24 x 30 mm, flush mounting.
Front bezel 18 mm dia. usable for devices with front dimension: 25 mm dia., flush mounting.
Continuation see next page
Front bezel IP 65 is supplied with fitted sealing ring.
Continuation see next page
Push-pull knob
Lever Typ-Nr.
e
Push-pull knob Plastic blue transparent 200-.255-00 0.003
Plastic green transparent 200-.245-00 0.003
Plastic red transparent 200-.225-00 0.003
Plastic white transparent 200-.265-00 0.003
Plastic yellow transparent 200-.275-00 0.003
Front bezel for buttons 30 - 70 mm and 55 - 70 mm
Front protection Front dimension device
Front bezel Typ-Nr.
e
Front bezel for buttons 30 - 70 mm and 55 - 70 mm IP 40 18 mm dia. Plastic black 200-2000-00 0.002
Plastic grey 200-1000-00 0.002
18 x 18 mm Plastic black 200-4000-00 0.002
Plastic grey 200-3000-00 0.002
18 x 24 mm Plastic black 200-6000-00 0.002
Plastic grey 200-5000-00 0.002
24 mm dia. Plastic black 200-8000-00 0.002
Plastic grey 200-7000-00 0.002
24 x 24 mm Plastic black 200-0000-00 0.002
Plastic grey 200-9000-00 0.002
IP 65 24 mm dia. Plastic black 200-8000-W0 0.002
Plastic grey 200-7000-W0 0.002
24 x 24 mm Plastic black 200-0000-W0 0.002
Plastic grey 200-9000-W0 0.002
Front bezel for Mushroom-head pushbutton 55 - 70 mm
Front protection
Front bezel
Ø 18
Typ-Nr.
e
Front bezel for Mushroom-head pushbutton 55 - 70 mm IP 40 Plastic black 200-2000-00 0.002
Plastic grey 200-1000-00 0.002