User's Manual

ITC2100-NA Operation and Service Manual Version 1.0

Page 98 of 129

6.9.2.5 Reboot / Shutdown

Choose menu item "Reboot" to reboot the ITC. Confirm with the "Apply"-button. Use com-

mand "Shutdown" to correctly shut down the ITC. This command can be found at two loca-

tions. Firstly in this menu beneath the Reboot command. Secondly, there is a separate

“Shutdown” button on the navigation bar which allows the ITC to be shut down.

The ITC2100 should always be shut down before switching it off!

Fig. 6-58: Reboot / Shut down