User's Manual

ITC2100-NA Operation and Service Manual Version 1.0

Page 96 of 129

6.9.2.3 IP Network Configuration

Each ITC2100 is preconfigured with the following standard IP address by default:

192.168.1.1

If the ITC2100 is operated as a master base station, it will very probably be integrated in an

existing LAN and the IP address must thus be adapted. If the LAN is linked to another LAN

(containing the alarm input software) via a gateway, the IP address of the gateway must be

entered.

CAUTION: If the "Apply"-button is pressed, the ITC can be accessed only with the set IP

addresses. The ITC is shut down automatically in the background and the station is con-

verted to this IP address.

Fig. 6-56: IP network configuration