User's Manual

ITC2100-NA Operation and Service Manual Version 1.0

Page 85 of 129

6.8.5 Process control

6.8.5.1 Error messages

Here all errors of the ITC2100 are displayed or logged. The user can display the files as re-

quired. There is an option for setting filters in order, for instance, to view only the error mes-

sages of the last 24 hours.

Fig. 6-47: Error messages

Field

Description

Files:

Click on the link "Monitoring", Communication", "Control", "User inter-

face" or "Transceiver" to view the corresponding log. The size of both log

files can be modified by clicking the link "Change filesize…" (do not set

above 10kB). By clicking on one of the small boxes (with a tick) and then

on the button Reload the display (lower half of the screen) is limited to

the log that was clicked.

Filter settings:

All: displays the total period of the logs selected in the field "Files"

Manual: displays the logs selected in the field "Files" within the period

defined in the field "Choose message:".

Last 24 hours: displays messages logged during the last 24 h from the

logs selected in the field "Files:".

Choose mes-

sage:

The displayed logging period can be limited. "From" indicates the starting

time and "To" the end point