User's Manual

ITC2100-NA Operation and Service Manual Version 1.0
© SWISSPHONE Wireless AG
Page 78 of 129
6.8.2.2 Base station counters
The base station counters are system counters which can also be polled through the air.
These counters provide the alarm input software with information on the general status of
the base station. The counters can also be reset via the alarm input software or via the air.
To reset the counters click "Reset base station counters". Only the current counters are re-
set (first digit e.g. 0/4), while the total number remains (second digit e.g. 0/4)
Fig. 6-43: Base station counters
Field
Description
Reset counters:
Specifies the number of new processes started.
EPS counters:
Indicates how many times the base station has already been
powered by the EPS (battery).
System fault:
Indicates how many times the base station was no longer availa-
ble or how many times it was in low-power mode.
Watchdog:
Specifies how many times the base station had to be restarted
since, for instance, certain processes were no longer available.