User's Manual

ITC2100-NA Operation and Service Manual Version 1.0
© SWISSPHONE Wireless AG
Page 72 of 129
6.6.3 Alarming Interfaces
6.6.3.1 Ethernet Interface
The ITC2100-NA is linked to the alarm input software via a LAN interface. The master or
standby base station must be aware of the IP and port address of the alarm input software
and this must be entered in the DiCal Host field. DiCal is a trademark of the Swissphone
and means here the alarm input software.
Fig. 6-37: Configuration of the host IP addresses
Field
Description
DiCal-Host1 IP (Master):
IP address of the supraregional network alarm controller
(over several rural districts).
DiCal-Host2 IP (Redun-
dant):
IP address of the redundant supraregional network alarm
controller (over several rural districts).
DiCal-Host3 IP:
IP-Adresse des regional network alarm controller (over the
local rural district).
DiCal-Host4 IP:
IP address of the redundant supraregional network alarm
controller (over the local rural district)
Alarming interface Server
port Address:
Port number of the network alarm controller server.
Alarming interface Client
port Address:
Port number of the network alarm controller client .