User's Manual

ITC2100-NA Operation and Service Manual Version 1.0

Page 66 of 129

6.6.2.2 Transmit Frequency

5 specific frequencies (channels 95 to 99) can be independently programmed. This is car-

ried out in a separate programming sector. Programming is limited to channels 95 to 99. As

soon as a channel has been programmed, the frequency should be entered in the appropri-

ate field, e.g. when channel 95 has be programmed, enter the new freuqncy in the field

"Channel 95". The frequency is immediately displayed for selection in the link "Transmitter

(Frequency / Power)" in the field "Frequency" and is designated with an asterisk (*).

Important: Frequency programming is carried out exclusively in a separate pro-

gramming sector. The newly programmed frequencies are entered in the fields

"Channel 95 to 99" so that they are listed here in the service pages for selection.

Fig. 6-33: Customer frequency table