User's Manual
ITC2100-NA Operation and Service Manual Version 1.0
© SWISSPHONE Wireless AG
Page 64 of 129
6.6.1.5 Simultaneous Alarm
Fig. 6-31: Configuration of alternative Baud rates/Frequencies and repetitions
Field
Description
Default frequency:
Default Baud rate:
The baud rate and frequency that are used by default.
Alternative Baud rate:
Alternative frequency:
The alternatively used baud rate and frequency.
Number of emissions:
Defines how many times the same alarm is to be repeated in
the network. 1-4 emissions can be set.
Sends in emissions
1..4:
Depending on the location of the base station, a delayed emis-
sion may be required due to neighbouring base stations in or-
der to avoid interferences. “Sends 1” is the first send, “Send 2”
the one immediately following, etc.
On: Emission occurs in the corresponding send.
Off: No emission in the corresponding send.