User's Manual

ITC2100-NA Operation and Service Manual Version 1.0
© SWISSPHONE Wireless AG
Page 63 of 129
6.6.1.4 Transmitter (frequency, power)
Fig. 6-30: Configuration of the transmitter parameters
Field
Description
Frequency:
Setting the frequency of the transmitter or receiver. If there is an
asterisk (*) at the beginning of the frequency to be set, e.g.
*173.5125, this frequency has been subsequently programmed
automatically (see chapter 6.6.2.2).
Frequency offset:
Setting the carrier frequency offset in Hz.
Loudspeaker:
The ITC features a small loudspeaker which can be used for moni-
toring the received messages. This can be activated and deactivat-
ed in this menu.
Tx delay:
Depending on the locations of the base stations, delayed transmis-
sion is necessary in comparison with neighbouring base stations in
the same ring. This delay ensures that in the defined border zones
of neighbouring base stations overlapping signals are as far as
possible synchronised.
Power output:
The transmitter has a maximum power of 50W (40W for UHF)
which can be set in this field.