User's Manual

ITC2100-NA Operation and Service Manual Version 1.0
© SWISSPHONE Wireless AG
Page 51 of 129
6.5.7 Local Alarms within 24h
This window displays the number of alarms tripped locally within the last 24 hours. These
parameters can also be polled via the Digicom (Swissphone alert input software) from re-
mote. The following figure on the left shows version I ("Value I") and on the right version II
("Value II", i.e. ITC2100 with optional I/O card).
Fig. 6-16: Local alarms within 24h without (l.) / with I/O card (r.)
Fig. 6-17: Disabled transmission when the serial interface is used for a local task
Field
Description
GUI alarming:
The number of alarms during the previous 24 hours
RS 232 alarming:
The number of alarms via a local network alarm controller.
Local alarming (channel
1):
The number of local alarms via channel 1 input contact of the
sync card (D-sub 9, pin 1 and 4).
Local alarming (channel
2..4)
The number of alarms via channels 2 to 4 input contacts of
the I/O card.
State Alarming
Status display with ref. to successful or unsuccessful alarms.