User's Manual
ITC2100-NA Operation and Service Manual Version 1.0
© SWISSPHONE Wireless AG
Page 50 of 129
6.5.6.2 Digital Outputs
Fig. 6-14: Status of the digital outputs without (l.) / with I/O card (r.)
Fig. 6-15: Status of the digital outputs at activated siren control
Field
(Digital outputs)
Description
Channel 1..3: Out-
putLabel-1..3
Relay output (digital outputs) - siren
Indicates the status of the output (on/off). A siren can connect-
ed to this output. The siren can be switched remotely (using a
special RIC address. This function must be enabled in the
menu Configuration with the link "Optional base station set-
tings" in the field "Siren support". Otherwise this output can be
switched locally from the ITC.
Channel 4..8: Out-
putLabel-4..8
Relay outputs (digital outputs)
Indicates the status of the output (on/off). This output can be
switched locally from the ITC (e.g. open/close door).
Status alarm
The operating mode of the digital I/O module is displayed.