User's Manual

ITC2100-NA Operation and Service Manual Version 1.0
© SWISSPHONE Wireless AG
Page 45 of 129
6.5.4 BS Controller
The status of the controller (BSC) can be seen on the status page via the link BS Controller.
The status of the controller and the most important system counters are displayed. These
counters can be reset via the menu Logging, link System statistic by clicking the link Reset
counters (see chapter 6.8.2.2). These counters can be polled and reset via the Digicom
(Swissphone alerting software) from a remote location.
Fig. 6-11: Status page of the controller
Field:
BS Controller Status
Description
Normal!
The controller is working correctly. All counters = 0.
Unexpected system
mode!
The operation of the controller must be checked. counter > 0.
Field
Description
Reset counter:
Displays the number of restarted procedures.
Watchdog counter:
Displays how many times the ITC had to automatically restart
internal process because of, for instance, a conflict with an-
other process.
EPS counter:
Displays how many time the ITC has been supplied by the
battery.
System failure:
Displays how many times the ITC was not available (e.g. due
to power failure and battery voltage too low).