User's Manual

ITC2100-NA Operation and Service Manual Version 1.0
© SWISSPHONE Wireless AG
Page 44 of 129
Fig. 6-10: Procedure of channel selection at ITC2000 and ITC2100
Field:
RSSI [dBm]
Description
-48 [dBm]
The field strength from the last received message .was meas-
ured and is displayed:
Good: > -90dBm
Critical: -90dBm .. -100dBm
Poor: < -100dBm
The received field strength is indicated visually on the RC card
by LED's (see chapter 7.5).
--- [dBm]
Since commissioning no signal has been received on the re-
ceiver frequency
0 [dBm]
The receiver has not been aligned yet and therefore no value
can be displayed.
Field:
Neighbournetwork
Description
Neighbournet recognised
Detection of a neighbouring network is not yet implemented.
No signs
BSC
RC
TRx
I
2
C bus
AT96 bus
1)
1)
2)
3)
Procedure of channel selection at ITC2000:
BSC
TRx
COM
1)
2)
3)
Procedure of channel selection at ITC2100: