User's Manual

ITC2100-NA Operation and Service Manual Version 1.0
© SWISSPHONE Wireless AG
Page 42 of 129
6.5.3 Receiver (RX)
The status of the receiver part (Rx) of the transceiver module can be checked in detail via
the link Receiver (RX) on the status page.
Fig. 6-9: Status page of the receiver part (Rx)
Field:
Receiver status
Description
Normal!
The receiver section (Rx) is working correctly.
Temporary error in the
Rx system!
The receiver is operating perfectly but was faulty recently (no
access to I
2
C-Bus or the frequency programmingng in the Rx
chip was faulty.
Conflict in Rx system!
A neighbouring network is interfering with the reception (not yet
implemented)
RSSI critical!
The received field strength (RSSI) is in a critical range
(-90dBm .. -100dBm).
RSSI too low!
The received field strength (RSSI) is too low (<-100dBm).
RSSI not calibrated!
The receiver has not been properly aligned and therefore can-
not display any value (in field "RSSI [dBm]" 0 [dBm] is dis-
played
Error in Rx system!
The receiver is faulty.