User's Manual

ITC2100-NA Operation and Service Manual Version 1.0
© SWISSPHONE Wireless AG
Page 41 of 129
Field:
Power output
Description
OK
The value of the output power correspond to the required val-
ue.
Inadequate output power
The transceiver module is defective and must be replaced.
The required value and actual value of the output power does
not correspond and this may lead to malfunctions.
Field:
Reflection
Description
OK
The reflection power is small (within allowed range).
Excessive reflection
power
If no load (antenna or artificial load etc.) is connected to the
transmitter antenna, or if the load is defective (short-circuit),
the output power is reflected and detected by the transceiver
module.