User's Manual

ITC2100-NA Operation and Service Manual Version 1.0

Page 26 of 129

5.14 GPS-Alternative 2: Connection of GPS Antenna to Master-ITC

This alternative contains the GPS receiver in the slot card. The GPS signal is received by

the GPS antenna and forwarded to the GPS receiver card via coaxial cable.

Fig. 5-8: GPS receiver card with potential GPS antenna and fixture

Inserting the GPS card in the ITC2100-NA:

1. Ensure that the unit is switched off, disconnect mains cable and battery connections.

2. Unscrew and remove cover plate of the slot next to the sync card.

3. Insert the GPS card in the free slot and secure.

4. Reconnect the mains and battery and switch on again.

5. Check that the green LED lights.