User's Manual

ITC2100-NA Operation and Service Manual Version 1.0
© SWISSPHONE Wireless AG
Page 14 of 129
4.3 Functional Description of the ITC2100-NA
4.3.1 Functional Interfaces
4.3.1.1 Master-ITC Interfaces
ITC Input
ITC Output
Purpose
HW interface
Protocol
HW interface
Protocol
Alerting /
Monitoring
Ethernet RJ45
Swissphone
protocol
2
over
TCP/IP
N-type 50Ω
POCSAG over
paging fre-
quency
Alerting
RS232
D-Sub9
MIP11++
3
4.3.1.2 Slave-ITC Interfaces
ITC Input
ITC Output
Purpose
HW interface
Protocol
HW interface
Protocol
Alerting /
Monitoring
N-type 50Ω
POCSAG over
paging fre-
quency
N-type 50Ω
POCSAG over
paging fre-
quency
Alerting (on
next rings)
RS232
D-Sub9
MIP11++
4.3.2 Wave Network Configuration
Fig. 4-1: Typical wave network with ITC2100-NA
2
Swissphone alerting software (i.e. Digicom) use this protocol. A command & control centre
is able to transmit a paging message by communication with the Swissphone alerting soft-
ware via the public Swissphone protocol TMIP.
3
Swissphone public access protocol