User manual

Proceed as follows to set the fader function:
1. Press [EDIT] to activate the Edit mode.
2. Press [ASSIGN FADER].
ð
The currently set value is flashing in the display.
3. Enter the desired value (‘1’…‘127’) via the numeric keys.
4. Confirm the input with [ENTER].
5. Press [EDIT] to leave the Edit mode.
Proceed as follows to set the pedal function:
1. Press [EDIT] to activate the Edit mode.
2. Press [ASSIGN PEDAL].
ð
The currently set value is flashing in the display.
3. Enter the desired value (‘1’…‘127’) via the numeric keys.
4. Confirm the input with [ENTER].
5. Press [EDIT] to leave the Edit mode.
Proceed as follows to set the encoder:
1. Press [EDIT] to activate the Edit mode.
2. Press [ASSIGN KNOB].
ð
The currently set value is flashing in the display.
3. Enter the desired value (‘1’…‘127’) via the numeric keys.
4. Confirm the input with [ENTER].
5. Press [EDIT] to leave the Edit mode.
Proceed as follows to turn all notes off:
1. Press [EDIT] to activate the Edit mode.
2. Press [ALL NOTES OFF].
3. Confirm with [ENTER].
4. Press [EDIT] to leave the Edit mode.
Proceed as follows to reset the MIDI settings:
1. Press [EDIT] to activate the Edit mode.
2. Press [RESET ALL].
3. Confirm the input with [ENTER].
4. Press [EDIT] to leave the Edit mode.
Fader function
Pedal function
Encoder
All notes off (Panic function)
MIDI reset command
Functions
MIDI keyboard
14