User manual
Table Of Contents
- 1 Introduction
- 2 Applications
- 3 Typical Application
- 4 Unpacking
- 5 Overview
- 6 Battery
- 7 USB Port
- 8 Backlight
- 9 Choose Operating Modes
- 10 RECEIVE DMX
- 11 Receiver Options
- 12 SEND DMX
- 13 Send Options
- 14 CABLE TESTER
- 15 CHANEL TRACER
- 16 TIMINGS
- 17 SEQUENCE
- 18 FIXTURES
- 19 Connect to PC
- 20 OPTIONS
- 21 RDM Controller (XMT-350 Only)
- 22 Additional Technical Information
- 23 Safety Information
- 24 Technical Data
22 Additional Technical Information
22.1 Block Diagram XMT Interfaces
22.2 Ground Topologies
Is the XMT battery operated, the DMX out port is an
isolated transmitter.
Is the XMT connected to a PC, the DMX out port might be
a ground referenced transmitter when the USB is
grounded.
Is the XMT battery operated, the DMX in port is an
isolated receiver.
Is the XMT connected to a PC, the DMX in port might be a
ground referenced receiver when the USB is grounded.
Is the XMT connected to a DMX controller with a ground
referenced transmitter, the XMT DMX out port is a
ground referenced transmitter.
Is the XMT connected to a USB charger, the DMX in port
might be an isolated transmitter when the USB is not
grounded.
23 PRELIMINARY
PROTECTION
CABLE
TESTER
RECEIVER
TRANS-
MITTER
PROTECTION
CABLE
TESTERDMX IN
2
3
1
4
5
2
3
1
4
5
DMX OUT