User manual

If enabled, the binary representation of the address is displayed below the address in
receive DMX mode and in send DMX mode.
20.4 Show Min and Max Values
• Choose the SHOW MIN-MAX item with [UP] or [DOWN] buttons.
• Press [OK] to toggle between YES and NO.
If enabled, the min and max values of a level are displayed below the level in receive
DMX mode.
20.5 CONTRAST
• Choose the CONTRAST item with the [UP]/[DOWN] buttons.
• Press [OK] to enter the contrast editor.
• Use [+] and [-] buttons to modify the contrast.
20.6 POWER SETTINGS
• Choose the POWER SETTINGS item using the [UP]/[DOWN] buttons.
• Press [OK] to enter the power settings menu.
The power settings menu has three items:
BACKLIGHT BRIGHTNESS Set the brightness of the backlight.
BACKLIGHT DURATION Set the duration of the backlight.
TURN OFF IF IDLE Automatic turn-off time for the XMT when battery operated.
BACKLIGHT BRIGHTNESS
• Choose the BACKLIGHT BRIGHTNESS item with [UP] or [DOWN] buttons.
• Press [OK] to change the backlight brightness from 10% to 100% in steps of 10%.
BACKLIGHT DURATION
• Choose the BACKLIGHT DURATION item with [UP] or [DOWN] buttons.
• Press [OK] to change the backlight duration from 10sec to 2min.
TURN OFF IF IDLE
• Choose the TURN OFF IF IDLE item with [UP] or [DOWN] buttons.
• Press [OK] to change the time after which the XMT will turn off automatically when battery operated.
Possible values are: NO = stays on, 1min, 2min, 3min, 5min, 10min. The time is reset to zero whenever a button of the
keypad is pressed.
The XMT will not turn off automatically when it’s USB powered.
19 PRELIMINARY
Binary Address
Min Level
Max Level
The LED backlight of the LCD screen use a lot of energy. Try to set the
backlight as low as possible and the duration of the backlight as short as
necessary to save battery life.