User's Manual

Step 3: Turn right to close

the rear cover

Step 3: Separate the FMN

device from the bracket

Tips:

Once the FMN device is added through the "Find My" APP,

then other iOS system can not be added at the same time

and have to remove before added to other IOS systems.

Tips:

The average standby time of FMN equipment is about one year,

and the standby time may be shorter due to other factors,

such as playing sound for a long time

The locating accuracy of this product depends on the number

of iOS devices surrounding the FMN device.

This product requires an Apple device with iOS 14.0 or later to

be functional. If it is not a software version mentioned before,

please upgrade your iOS device software to required version.

Swissdigital Design FMN Finder (SDBT-014)

is FCC, RoHS and CE certified.

Step 4: Zip up.

Step 1: Get a new battery

and rotate to the left to

open the rear cover

Step 2: Replace the old button

battery with the new one

CR2032

9. How to replace the Battery and quit pairing broadcast

10. Other instructions

11.FCC statement

Try replacing the battery when the following situations occur

a)Unable to connect FMN device with the iOS system and failed

to re-install the battery .

b) "Search" APP shows low power.

c) Unable to update the latest location information

after connecting

2) Battery replacement steps

1) FCC Interference Statement (Part 15.105 (b))

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.