Installation Guide

3
3.
5.
4.
· When connecting to a 3” sewer line it is advised
to drill a 3 5⁄8” hole before connecting the
discharge pipe to the frame.
· It is possible to offset the discharge pipe left
or right. If offsetting is required, you must
move the top bracket holding the discharge
pipe to the back holes in the frame. This
allows you to miss the carrier frame when
connecting the necessary plumbing.
· For a vertical discharge, leave bracket as
shown above.
· Use this mounting position for an offset
installation.
WALL-HUNG CARRIER SYSTEM INSTALLATION INSTRUCTIONS