Installation Guide

— 7 —
11. 12.
L
L+¹5⁄64”
max.
¹⁄8”
max.
¹⁄8”
²5⁄32”
BACK-TO-WALL CARRIER SYSTEM INSTALLATION INSTRUCTIONS
Toilet Installation
~ 2 ³⁄4”
· Carefully cut off excess after complete installation.
· Insert tube into wall and mark as shown.
· De-burr any particles after cutting. · Lubricate both ends then install.
· Ensure bowl is level and install.
· Caulk and seal around bowl.
· Insert tube into bowl and mark as shown.
· Carefully measure between your marks,
this distance will be cut off the bald end.
· Add 15/64” to measurement before
cutting, leaving a small cushion for error.