Installation Guide

— 4 —
5.
6.
39 ³⁄8”
0
H
X
L=X-H
1
L (max.¹5⁄64”)
3
2
2
3
1
BACK-TO-WALL CARRIER SYSTEM INSTALLATION INSTRUCTIONS
Grease
· Make sure unit is plumbed vertically and horizontally.
· Lubricate with grease before installing.
· Insert dirt cap (3) during construction.
· De-burr any particles from pipe after cutting.
· From finished floor
to mark indicated.
· Refer to bowl being used to measure
the correct heights and measurements
(see below).