Full Product Manual

2. Drill Countertop
· Cut the opening for the drain in the countertop.
1. Mark Faucet & Drain Location
· Place your sink in desired location on
countertop and mark the drain and faucet hole
with a pencil.
· Make sure clearance is suitable for backsplash,
faucet, and plumbing for the sink.
— 2 —
4. Install Sink
· Check alignment of the sink to the opening in
the countertop.
· Use a bead of clear silicone (or preferred
adhesive) around the underside of the sink.
· Carefully place the sink on the countertop,
align, and press firmly.
· Allow sealant to set above 60 minutes.
· Use acetone or denatured alcohol to remove
any excess sealant after application.
VESSEL SINK INSTALLATION INSTRUCTIONS
3. Install Faucet
· Install faucet (not included) according to
manufacturer’s instructions..