Installation Guide

WATERLESS URINAL INSTALLATION INSTRUCTIONS

— 5 —

NOTE: Drawings may not exactly define contour of china.

4. Install Connecting Tubes

· Insert the trap connector or adapter into the drain pipe, make sure the drain pipe is rigid

and fixed to the wall.

· Insert the tube into the drain, cut tube if necessary.

NOTE: If the drain pipe is a different diameter it is recommended to buy a sanitary coupling

or adapter as needed.

5. Check Mount Position

· Mount urinal on wall bracket.

· Screw the nut into the cartridge. Verify the tilt of the pipe elbow is adequate to avoid

stagnation and bad odors.

NOTE: If the bracket needs to be adjusted, remove urinal, loosen lag screw and adjust

bracket up/down as needed.

Ø 2” drain

pipe

nut

cartridge

trap connector

or adapter for

Ø 2” drain pipe