Installation Guide

1. Position and Trace Template
· Check the cutout template against the actual sink
to ensure a proper sized cutout.
· Place the cutout template in the desired location
on the countertop.
· Trace the template onto the countertop.
· Make sure clearance is suitable for back splash,
faucet, and plumbing for the sink.
2. Cut Countertop
· Cut an opening in the countertop by carefully
following the traced line from the template.
· Please use the appropriate saw that best fits your
countertop material. Professional should be
consulted for cutting countertop.
CUTOUT TEMPLATE
— 2 —
TOP-MOUNT KITCHEN SINK INSTALLATION INSTRUCTIONS
Mount
clip
Mount
clip
Sink
Sink
3. Prepare the Sink
· Place the sink into the installation hold to verify
the fit. Adjust the cutout if necessary.
· Place the sink upside down and align the bottom
edge with waterproof strip.
4. Attach Mounting Clips
· Attach the top-mount clips to the edge of the sink.