Installation Guide

ManualsBrandsSwiss Madison ManualsBathConcorde Single-Handle Bidet Faucet in Chrome

1

2

3

— 2 —

1. Remove Mounting Hardware

· Turn off water supply.

· Remove the mounting nut and metal

washer from the mounting pipe.

3. Secure Faucet

· Tighten mounting nut and mounting screw with a

Phillips screwdriver until snug.

4. Connect Water Supply

· Connect water supply to hot and cold hose. Turn

on and check for leaks.

· Remove aerator with aerator key, turn on water

for 15 seconds to flush any debris. Reassemble

aerator.

2. Install Faucet

· Install mounting plate, then insert faucet body

into hole in bidet.

· Install mounting hardware from underneath the

bidet to the faucet.

BIDET FAUCET INSTALLATION INSTRUCTIONS