Installation Guide

Toilet Hardware
INSTALLATION INSTRUCTIONS
well made forever
swissmadison.com | 1-434-MADISON | [e-mail]
Prior to Installation:
· Inspect product to ensure no damages have
occurred while in shipping.
· The step-by-step guidelines in the installation
instructions are a general reference.
· Read installation and maintenance instructions
thoroughly before installing. Be sure to use proper
tools and always wear proper personal safety
accessories for your protection.
Included Parts:
· Seat Hardware
· Flush Hardware
· Installation Bolts
If you have any questions or concerns
please contact us:
1-434-623-4766
[e-mail]
FLUSH HARDWARE INSTALLATION:
SEAT HARDWARE INSTALLATION:
1. Remove Old Hardware
· Unscrew plastic locking nut. Then pull down
on the base plate and remove the push button
from the tank lid.
1. Remove Old Hardware
· Push the quick release buttons on your toilet
seat and pull up to remove the seat. Remove old
cover caps.
2. Install New Hardware
· Insert the push button to the top of the tank
lid, slide on the base plate, and screw the plastic
locking nut in place.
2. Install New Hardware
· Replace old cover caps with new cover caps.
· Align the seat to the hinges and reattach the
seat to the bowl.