Full Product Manual

8. Prepare Cabinet for Installation

• Insert corner brace (BC67) into the corner of the cabinet as shown. Tighten all screws to secure into place.

Repeat for the last 3 corners using an additional 3 corner braces (BC67).

• Using the levelers on the bottom of the legs, adjust the height as needed. Use a level to verify that the

adjusted cabinet height is level on all sides.

• Optional: Remove the backing of a foam pad (L). Place the foam pad sticky side down onto the top of the

cabinet as shown. Repeat with all foam pads (L), placing them evenly around the perimeter of the cabinet top.

— 6 —

FREESTANDING VANITY INSTALLATION INSTRUCTIONS

NOTE :

Tighten all screws

BC67