Full Product Manual

— 5 —

FREESTANDING VANITY INSTALLATION INSTRUCTIONS

6. Install Leg Frame

• Insert 8 wooden dowels (C) into the leg frame as shown.

• Attach the leg frame to the base panel (1) by sliding the wooden dowels into the base.

• Insert 10 screws (I) into the leg frame as shown. Using an allen key (D), tighten each screw fully to

secure the frame into place.

7. Install Legs

• Take a leg (LC22B2) and remove the cover from the peg as shown. Repeat for all 4 legs.

• Insert the peg into the open hole of the bracket (BC410) as shown. On the other side slide on a

washer (F) and twist on a nut (M). Using the wrench (H), tighten the nut (M) to secure the leg into

place. Repeat for all legs.

• Once legs are secured in place, use a screwdriver to tighten all screws (G) around the leg frame.

LC22B2