Full Product Manual

— 4 —

FREESTANDING VANITY INSTALLATION INSTRUCTIONS

4. Attach Base

• Place the base panel (1) onto the cabinet frame as shown.

• Insert 6 screws (E) into the base panel as shown. Using an allen key (D), secure the base into place.

5. Assemble Leg Frame

• Connect bracket (BC410) to the left and right side of the side leg connecting board (5).

• Use 6 screws (G) and secure into place as shown. Be careful to leave about 2 mm of clearance

between the screw head and bracket (BC410).

• Repeat these steps with the other side leg connecting board (5).

• Connect the sides together by using a front leg connecting board (6) and 6 screws (G) as shown.

Repeat this step with the remaining front leg connecting board (6) and an additional 6 screws (G) to the other

side. Make sure to leave about 2 mm of clearance between the screw head and the bracket (BC410).

x 2

BC410

2 mm