Full Product Manual

— 2 —

1. Prepare Frame

• Insert 2 cam bolts (A), 2 wooden dowels (C) and 4 screws (G) into the front cross bar (4) as shown.

• Insert 4 wooden dowels (C) and 4 screws (G) into the rear top bar (7) as shown.

• Insert 6 wooden dowels (C) into the rear bottom bar (8) as shown.

• Insert 2 wooden dowels (C) into the cross beam (11) as shown. Repeat for the second cross beam (11).

• Tighten all screws into their respective wooden bars. Be sure to leave about 2-3 mm of the screw

exposed above the board. Be careful not to overtighten.

FREESTANDING VANITY INSTALLATION INSTRUCTIONS

Parts for Reference:

1. Base panel

2. Left side panel

3. Right side panel

4. Front cross bar

5. Side leg connecting boards (2)

6. Front leg connecting boards (2)

7. Rear top bar

8. Rear bottom bar

9. Left door

10. Right door

11. Cross beam (2)

A. Cam bolt

B. Cam lock

C. Wooden dowel

D. Allen key

E. Screws

F. Washer

G. Screws

H. Wrench

I. Screws

J. Screws for handles

K. Handles (2)

L. Foam pad

M. Nut

HS26A: Hinge (4)

BC67: Corner brace (4)

BC410: Bracket (4)

LC22B2: Leg (4)

HS26A

BC67

BC410

LC22B2

Do not

overtighten

x 2