Full Product Manual

— 4 —

5. Vanity Top Installation

· Install faucet and drain according to manufacturer’s

installation instructions. Do not overtighten, this may

cause the sink to crack.

· Set the vanity top on top of the vanity base, checking

the location of the p-trap and drain.

· Remove vanity top from vanity base. Apply a thin

bead of silicone around the vanity base and set the

vanity top carefully in place.

· Remove excess silicone with a wet cloth.

Wait 24 hours

before use.

24H

4. Secure Vanity to Wall

· Attach the 2 metal brackets (D) using 16

screws (G) to the rear top bar (4).

· Mark desired mounting location on wall and ensure

placement is level. Select installation option below:

WALL-HUNG VANITY INSTALLATION INSTRUCTIONS

Option 1: Securing to Drywall

· Position cabinet against wall in desired location.

· Using a pencil, make a mark on the wall through

the holes in each bracket (D).

· Move cabinet away from the wall. Create a pilot

hole in each mark on the wall, then insert the

plastic anchor (F).

· Place cabinet against the wall, insert a screw (F)

through the metal bracket (D) into each hole in the

wall, then tighten to plastic anchors (F) to secure

the vanity.

Option 2: Securing to Drywall & Wood Stud

· Position cabinet against wall in desired location,

be sure desired mounting location aligns with

existing wood studs.

· Insert screw (F) through the holes in the metal

bracket (D), then tighten through the drywall into

the wood stud. Repeat this step for the other

metal bracket (D) to secure the vanity.

2 pcs

Gx8