Full Product Manual

3. Attach Door

· Attach the hinges using 4 screws (G) to the door panel (6).

· Attach the door (6) to the cabinet body via the hinges (E) by using 4 screws (G).

· Install the handle (I) to the door (6) with 2 screws (H).

· If door does not align properly, adjust the hinges according to the diagram below.

Once adjustments have been completed, secure the hinges using 2 screws (G) each.

— 3 —

· If adjustment or realignment is needed, follow the instructions provided in the following chart.

Hinge/Door Adjustment and Realignment

1. Loosen screws 2. Adjust hinge 3. Tighten screws

Vertical

adjustment

Horizontal

adjustment

Door gap

adjustment

Before

adjustments:

After

adjustments:

WALL-HUNG VANITY INSTALLATION INSTRUCTIONS

Gx4