Installation Guide
NOTE: Drawings may not exactly dene contour of china.
— 6 —
3. Install Faucet and Drain
Following manufacturer's instructions, install drain
and faucet onto vanity top.
2. Install Vanity Base
Secure your vanity base to the wall in your
desired location.
NOTE: Use wall anchors along with included hardware.
4. Apply Adhesive
Using your chosen adhesive, apply a bead of
silicone around the rim of the console base.
5. Secure Sink
Carefully lower sink into place so that it is resting
on the vanity base.
Press sink rmly into place and wipe away excess
sealant with a damp cloth.
Allow for adhesive to cure for 24 hours;
this is dependent upon which adhesive you choose to use.
Be sure to check the instructions on your adhesive prior to use.