Full Product Manual

8. Attach Handles

· Install the 3 handles (L) to the 3 doors by screwing

6 screws (H) to the doors (6, 7 & 8).

— 6 —

FREESTANDING VANITY INSTALLATION INSTRUCTIONS

9. Secure Vanity to Wall

· Attach the 2 metal brackets (D) to the cabinet body using 16 screws (G) as shown.

· Mark desired mounting location on wall and ensure placement is level.

· Select installation option from below.

Option 1: Securing to Drywall

· Position cabinet against wall in desired location.

· Using a pencil, make a mark on the wall through

the holes in each bracket (D).

· Move cabinet away from the wall. Create a pilot

hole in each mark on the wall, then insert the

plastic anchor (F).

· Place cabinet against the wall, insert a screw (F)

through the metal bracket (D) into each hole in the

wall, then tighten to plastic anchors (F) to secure

the vanity.

Option 2: Securing to Drywall & Wood Stud

· Position cabinet against wall in desired location,

be sure desired mounting location aligns with

existing wood studs.

· Insert screw (F) through the holes in the metal

bracket (D), then tighten through the drywall into

the wood stud. Repeat this step for the other

metal bracket (D) to secure the vanity.

4 pcs

Gx8