Full Product Manual

— 2 —
· Install hot and cold handles and spout with
O-rings into the mounting holes.
1. Place into Mounting Holes
· Secure handles and spout with washers and
mounting bracket. Hand tighten brackets onto
the base of the faucet, then lock into position
using a screwdriver.
2. Secure Faucet
· Screw T-connector onto the bottom of the spout.
· Attach waterlines to the handles.
· Connect waterlines to the T-connector, then
tighten securely with a wrench. Do not overtighten.
3. Install T-Connector
· Connect to water supply and check for leaks.
· Remove aerator with a wrench, turn on the faucet
to the full mixed position and flush any debris.
4. Connect Water Supply
WIDESPREAD FAUCET INSTALLATION INSTRUCTIONS
COL D
HOT