Instructions / Assembly

ONE-PIECE TOILET INSTALLATION INSTRUCTIONS

1. Read the complete instruction manual before beginning installation.

2. Conrm that your model will t in intended location and plumbing xtures are located where

legally required before beginning installation.

3. Not all drawings on this manual are drawn to scale. Please refer to the model chart.

4. Two people are recommended to install and move this product.

5. Product is FRAGILE! To avoid breakage and possible injury handle with care.

— 4 —

NOTE: Drawings may not exactly dene contour of china.

The step-by-step guidelines in the installation instructions are a general reference for installing a Swiss Madison Wall Hung Bidet.

Should there be any discrepancies, Swiss Madison cannot be held liable.

It is recommended to install all Swiss Madison products by hiring a licensed professional

1. Prepare for Installation

Turn-o water supply and if necessary remove old bidet.

Be sure your in-wall carrier system has been installed.

Install or relocate the supply tubing and waste pipe.

2. Install Plumbing

Install plumbing and xtures onto bidet.