Instructions / Assembly

WALL HUNG BIDET ROUGHING-IN DIMENSIONS
— 3 —
NOTE: Specialized tools may be necessary to install Swiss Madison Wall Hung Bidet, plumbing not included.
NOTE: The In-Wall Carrier System is REQUIRED for installation of the wall hung bidet,
it can be purchased separately from Swiss Madison.
SUGGESTED TOOLS AND MATERIALS
Swiss Wall Hung Bidet
Bolts
In-wall Carrier System (SM-WC124) Faucet
Side Cover Caps
Safety Glasses
Wrench Level
Screwdriver
NOTE: Distance from wall to closest ange centerline must be listed as below.
Putty Knife
Tape Measure
Hacksaw
Flexible Supply Tube
PARTS LIST
REQUIRED COMPONENTS (NOT INCLUDED)
12.99”
22.44”
13.78”
22.44”
Sealant