Instructions / Assembly

1. Rough-In

· Rough plumbing must be pre-installed by a

certified plumber before installation.

· If floor drain-hole installation is needed, contact a

certified plumber.

· Place tub at final desired location and verify floor

drain and bathtub drain align.

Studs must be

flush and square

— 2 —

2. Position Tub

· Do not install the product with any air gaps under

the bottom support or product damage will occur.

· If installation surface is not level, use leveling

compound or mortar bed for proper installation.

· To ensure base is installed correctly, entire bottom

support must contact a flat, level surface.

· Adjust legs to ensure tub is level with floor.

· A customized front apron is needed to complete

the project.

Bottom

support

Wall

Wall studs

6” x 12”

Rough

cutout

Rough-in

6”

12”

3-SIDED INTEGRAL FLANGE BATHTUB INSTALLATION INSTRUCTIONS